Standing Seam Metal Roofing
Premium concealed fastener roofing system with maximum longevity
Standing seam metal roofing represents the pinnacle of metal roofing technology. With raised vertical seams and concealed fasteners, this system offers unmatched weather protection, longevity, and architectural appeal. Ideal for modern homes, low slopes, and homeowners seeking a lifetime roof.
Key Benefits
- ✓Concealed fasteners eliminate leak points and corrosion
- ✓50-70+ year lifespan with minimal maintenance
- ✓Suitable for low slopes (1:12 minimum)
- ✓Thermal expansion accommodation prevents oil-canning
- ✓Clean, modern aesthetic with vertical lines
- ✓Clamp-on snow guards without roof penetrations
- ✓Superior wind and weather resistance
- ✓Energy efficient with reflective PVDF finishes
Best For
- •Modern and contemporary architecture
- •Low-slope roofs (1:12 to 3:12)
- •Homeowners prioritizing longevity
- •Coastal or high-wind environments
- •Commercial and institutional buildings
- •Energy-conscious projects
Profile Options
Choose the perfect profile for your project
Snap-Lock Standing Seam
1 inch seam height with snap-together clips. Most economical standing seam option. Allows for thermal movement.
Mechanical Lock 1.5" Seam
1.5 inch seam with mechanical seaming tool. Superior wind resistance and weather-tightness. Industry standard for commercial.
Mechanical Lock 2" Seam
2 inch seam for maximum wind uplift resistance. Preferred for coastal or high-wind zones. Architectural statement.
Double-Lock Standing Seam
Traditional double-folded seam, mechanically seamed. Historic appearance with modern performance.
Popular Colors
Available colors (actual colors may vary by manufacturer)
Charcoal Gray
Black
Slate Gray
Bronze
Copper Penny
Forest Green
Burgundy Red
Pewter Gray
Galvalume (Bare Metal)
Aged Copper (Patina)
White
Stone Beige
Want to see the colors in person?
Request Sample KitTechnical Specifications
Professional-grade materials and components
gauge Options
24 gauge (premium), 26 gauge (standard)
panel Widths
12 inches, 16 inches, 18 inches
finishes
SMP (Standard), PVDF/Kynar 500 (Premium)
warranty
30-40 years paint, lifetime perforation (material)
lifespan
50-70+ years
min Slope
1:12 (some profiles), 2:12 (recommended)
Warranty Note: Warranty periods listed are manufacturer warranties on materials and finishes. Ravix provides a separate workmanship warranty on all installations covering labor and installation quality.
Installation Process
Professional installation by certified experts
→Step-by-Step
- 1Remove existing roofing (if needed) and inspect deck
- 2Repair or replace damaged decking
- 3Install ice and water shield at eaves, valleys, and penetrations
- 4Apply high-temperature synthetic underlayment
- 5Install starter clips at eave
- 6Snap or mechanically seam panels from eave to ridge
- 7Install concealed clips every 12-24 inches
- 8Custom-fabricate and install ridge cap, hip, and valley flashings
- 9Install clamp-on snow guards (no penetrations)
- 10Seal all penetrations with EPDM boots or lead flashings
- 11Final inspection and cleanup
Timeline
3-7 days for typical residential roof
Preparation
- •Clear access to roof perimeter
- •Protect landscaping and vehicles
- •Arrange dumpster for tear-off materials
- •Schedule electrical disconnect if needed
- •Plan for noise and disruption
Maintenance & Care
Minimal maintenance for maximum longevity
Frequency
Annual inspection recommended
Maintenance Tasks
- ✓Inspect clips and fasteners for movement
- ✓Check sealant around penetrations
- ✓Clear debris from valleys and gutters
- ✓Inspect snow guards for proper attachment
- ✓Look for panel damage from hail or branches
- ✓Verify ridge and hip caps are secure
Typical Costs
Minimal - typically $200-400 for annual professional inspection
Investment & Pricing
Transparent pricing for quality installations
$12-20 per square foot installed (mid to premium)
Typical installed cost
→Factors Affecting Cost
- •Panel profile (snap-lock vs. mechanical seam)
- •Gauge thickness (24ga vs. 26ga)
- •Finish type (SMP vs. PVDF)
- •Roof complexity and pitch
- •Tear-off and disposal costs
- •Underlayment and ice shield coverage
- •Snow guard engineering and quantity
- •Custom flashing and trim requirements
Ready for an accurate quote tailored to your project?
Get Your Free EstimateReady to Get Started?
Contact Ravix Custom Exteriors for expert standing seam metal roofing installation
Free estimates • No obligation • Fast response